VEECO TERMINAL BLOCKS are designed for simple and economical grouping of any number of ways.
For each assembly, only one end plate is required at the end. Terminal Block moulded in bakelite and neutral connection is also available.
RANGE
Presently available in 30amp, 60amp, 100amp.
CONSTRUCTION
VEECO TERMINAL BLOCKS are made of- Fix the channel in required position using 2 BA or 3/16” BSF screws. The slotted construction avoids the need for exact measurement.
- Spring the moulded block into the channel.
- Press downward until the other lip of the channel enters the opposite end of the block. The block will remain safely in position until the clamp is fitted.
- Close up the blocks until the molded interlocks are engaged and fit a clamp at each end.
When cutting off the channel, it is advisable to leave it longer to accommodate possible future additions. Should it be necessary to remove a block for any reason, loosen one end clamp, slide blocks apart until the interlock is free, pres the block towards springs and lift out.
TECHNIAL DATA
| Electrical ratings : | 30 A at 500 V AC 60 A at 500 V AC 100 A at 500 V AC |
| Body and End Plate : | Moulded Bakelite |
| Connecting link : | Brass to IS 410 |
| Screws : | MS Passivated |
| Channel : | Steel Passivated |
| End Clamp and Screw : | Steel Passivated |
| Test Voltage : | 2000 V between adjacent terminals and 2500 V between terminals and channels. |